Pattern Release – Bear Candy Cane Ornament Crochet Pattern.

Look whos out of hibernation and on the blog! The Bear is next of the Candy Cane Ornament Collection to be released. The rest of his Candy Cane Ornament Buddies (16 in total) will be joining him over the next couple weeks.

For those of you wanting to get started on the rest of the collection, I’ve created a bundle just for you!! The Candy Cane Ornament Bundle includes the FULL 16 pattern collection, with a clickable table of contents!

Allll this cuteness is available NOW and on SALE for a limited time! Check out the Bundle on Ravelry or Etsy!

Handmade ornaments are my absolute favourite. This new series of Christmas Tree Ornaments has quickly become my new favourite set. Mini Candy Canes for arms and legs?! Umm yes, please! Don’t have mini candy canes on hand? No problem, the pattern incudes instructions for curly cue limbs as well! I love how unique and adorable these guys are.

Are you in need of teacher’s gifts? A way to stock up your craft table? Or perhaps a cute way to add candy canes to the tops of a beautifully wrapped gift or to your own Christmas tree. The Candy Cane Ornament Collection are perfect for all of the above.

The Candy Cane Ornament Collection has been designed using a combination of WeCrochet’s Brava Worsted Yarn (4) and Brava Tweed Worsted (4). The yarn is super soft and the colours are amazing. I absolutely loved working with it for this project. The Brava Worsted yarn lines can be found on the WeCrochet website. You can also use your favourite medium (4) weight yarn. It is not recommended to adjust the weight of yarn with this project.

The pattern is shown using 6mm flat back black pearls that have been hot glued in place. You could definitely use 6mm safety eyes if preferred, or embroider the eyes on later. Disclaimer – if the ornaments will be within reach of children 3 and under, then flat back pearls or safety eyes can be a choking hazard. Check out the material section below for the rest of the materials needed to crochet your own Bear Candy Cane Ornament.

The Candy Cane Ornaments work up quickly and easily, with minimal sewing. The head and body are worked in one piece. This mean that only the facial features and tail need to be sewn or embroidered on.

Check out the Bear Candy Cane Ornament crochet pattern below or grab the inexpensive ad-free PDF with additional helpful photos on Ravelry or Etsy

Want to stay up to date on all the Darling Maple Designs happenings? Then be sure to subscribe to my newsletter

Thank you so much for being here and crocheting with me .

Please share your work by tagging me on FB or IG @darlingmapledesigns or use #darlingmapledesigns for a chance to have your work featured in my IG stories! Sara

Interested in more cute crochet patterns? Check these out!

What you will need for your Bear Candy Cane Ornament Crochet Pattern

Gauge:   

4 rounds of sc = 1.5 inches diameter

Gauge Pattern:       

Create a Magic Ring
Round 1:     6sc in the ring (6)
Round 2:     2sc in each st (12)
Round 3:     *sc, 2sc* 6 times (18)
Round 4:    *sc in the next 2 sts, 2sc* 6 times (24)

Abbreviations:

BLO	Back Loop Only
ch	chain
FLO	Front Loop Only
sc	single crochet
scdec	single crochet decrease
ss	slip stitch
st(s)	stich(es)
*to*	repeat the sequence between the ** the number of times indicated

Special Stitches & Techniques: 

Magic ring – https://youtu.be/ayek4XfmDvM
Embroider Nose –     https://youtu.be/d3tmXtfMZOw
Sleepy Eye – https://youtu.be/4kO0XAkXMGo (if not using safety eyes/flat back pearls)
How to Close the Head and Begin the Body –https://youtu.be/h42lU_7gam4

Notes:

• #sc (eg. 2sc, 3sc, etc) shows the number of scs to be completed in the indicated st
• sts listed within brackets are to be worked in the same st.  Eg. (Sc, hdc)
• I highly recommend using a stitch marker to help keep track of the rounds
• All rounds will be continuous (unless otherwise stated).
• When changing colours, end off previous colour unless noted otherwise.

---

Check out the Candy Cane Ornament Collection together as a 16 Pattern Bundle on Ravelry or Etsy!

---

Start your Bear Candy Cane Ornament Crochet Pattern

Body/Head of Bear Candy Cane Ornament:

The head/body is created in continuous rounds beginning with the head

Using Brown, create a Magic Ring

Round 1:    6sc in the ring (6)
Round 2:    *2sc* 6 times (12)
Round 3:    *sc, 2sc* 6 times (18)
Round 4:    *sc in the next 2 sts, 2sc* 6 times (24)
Rounds 5-10:    sc in each st (24)
Round 11:    *sc in the next 2 sts, scdec* 6 times (18)
Round 12:    *sc in the next st, scdec* 6 times (12)
See Video for assistance with the next 2 Rounds: https://youtu.be/h42lU_7gam4
Round 13:    FLO for the entire round, sc in each st (12), do not end off…

• Place a stitch marker in the loop on your hook to keep it from pulling out.
• Place on a flat surface with the top of the head facing away from you and the last stitch sitting at the far right (far left if left handed) and ‘flatten’ the head down. 
• If using – add safety eyes to Round 7 approx 4 sts apart
• Lightly stuff the head.  Flatten the head down.
• Using a scrap piece of yarn and starting with the first and last st of Round 13, mattress stitch in the back loops of Round 12, across the opening.
• Continue working Round 14 from where you left off after Round 13.

Round 14:    creating the arm holes *ch5, sc in the next 6 sts* twice (12 + 10chs)
Round 15:    *sc in the next 5 chs, sc in the next 6 sts* twice (22)
Round 16:    *sc in the next 9 sts, scdec* twice (20)
Rounds 17-18:    sc in each st (20)
Round 19:    *sc in the next 8 sts, scdec* twice (18)
Rounds 20-23:    sc in each st (18)
End off, by slip stitching to the next st, weave in end.

Muzzle:

The muzzle is worked from the tip back, in continuous rounds.

Using Almond, create a Magic Ring

Round 1:     6sc in the Ring (6)   
Round 2:     *2sc* 6 times (12)
Round 3:    sc in each st (12)
End off, leaving a 12” tail for sewing.  See video to embroider nose (using Dark Brown) onto the muzzle before sewing the muzzle to the head: https://youtu.be/d3tmXtfMZOw

Ears (make 2):

Made in continuous rounds.

Using Brown, create a Magic Ring

Round 1:     6sc in the Ring (6)   
Round 2:     *sc in the next 2 sts, 2sc* twice (8)
Round 3:    sc in each st (8)
End off, leaving a 9” tail for sewing.  

Tail:

Created in continuous rounds.

Using Brown, create a Magic Ring

Round 1:      6sc in the Ring (6)
Round 2:    sc in each st (6)   
End off, leaving a 6” tail for sewing

Scarf:

Created in a ch.

Using Green, ch 35

End off, cut ends close to beginning and end of chain.

Hat:    

Created in continuous rounds.

Using Red, create a Magic Ring

Round 1:      4sc in the Ring (4)
Round 2:    *sc, 2sc* twice (6)
Round 3:    *sc, 2sc* 3 times (9)
Round 4:    sc in each st (9), change to White   
Round 5:    sc in each st (9)
End off, leaving a 12” tail for sewing.  With a scrap piece of White yarn, sew through the top of the hat (through the same holes over and over again) until it begins to fill out and look like a pom pom.

Curly Cue Arms/Legs (make 2, if not using candy canes):

Created in 1 row

Using Colour of  Choice, ch 36

Row 1:  3sc in the 2nd ch from the hook, 3sc in each of the next 34chs (105)
End off, Sew on bells if desired, Weave in ends

Sewing Placement for your Bear Candy Cane Ornament – I highly recommend pinning ALL parts in place BEFORE sewing to make sure everything sits properly and is to your liking 🙂

Eyes (if not using safety eyes): Hot glue on the flat backed pearl or embroider eye/sleepy eye at approx. Round 7, 4 sts apart.  See video for assistance: https://youtu.be/4kO0XAkXMGo

Muzzle: If you haven’t already, using Dark Brown, embroider on the nose (see video: https://youtu.be/d3tmXtfMZOw ).  Place the muzzle centred just below the eyes between Rounds 9-12.  Stuff lightly and sew  in place along Round 3 of the muzzle.

Ears: Place on either side head from round 3 down to 5. Sew in place.

Hat: Place on the top of the head between the ears and sew down along Round 5 of the hat

Tail: Place the tail centred at the back of the body on Rounds 20-21.  Sew in place.

Scarf: Tie in place around the neck.

Ornament Hanger Cut a piece of twine approx 6” long.  Sew through the top of the head.  Tie a knot.

Arms/Legs: Add your mini candy canes or curly cues  into the holes made in Round 14 of the Head/Body.

Congratulations!

You have now completed your Bear Candy Cane Ornament Crochet Pattern.

We love seeing your finished projects. Tag us in your photos and posts using #DarlingMapleDesigns or @darlingmapledesigns.

Thank you so much for joining us! I hope you loved completing your Bear Candy Cane Crochet Pattern as much as I enjoyed designing it for you. Don’t want to miss a stitch? Subscribe to the Darling Maple Designs newsletter and I’ll send updates for new pattern releases, sales and promotions straight to your inbox. See you again soon! Sara <3

If you have any questions or concerns with this, or any other pattern written by Darling Maple Designs, please do not hesitate to contact me at: info@darlingmapledesigns.com.

Don’t forget to Pin it to your project board.